FASS TSF17180F140G - Titanium Signature Series - 140 GPH

FASS Fuel System 140 GPH / 2011 - 2016 Powerstroke 6.7 L - Titanium Signature Series - TSF17180F140G

On sale: ~~$798.95~~ $759.00

Part Number: TSF17180F140G

Authorized - VIP Fass Dealer

Lowest Price - Purchase Here !

Free Shipping ! - Warranty !

Quantity

Description

TSF17180F140G - FASS Diesel Fuel Systems - Titanium Signature Series - 140 GPH

Vehicle:

2011 - 2016 Ford F-250 Powerstroke 6.7 L
2011 - 2016 Ford F-350 Powerstroke 6.7 L
2011 - 2016 Ford F-450 Powerstroke 6.7 L
NOTE: Installation of this kit on a cab and chassis / F450 may require modifications.

Application:

Stock to 700 HP ( Horsepower )

FASS TSF17180F140G Details:

60-65 PSI Fuel Pressure
140 GPH Gallons Per Hour Flow Rating
Titanium Signature Series

FASS TSF17180F140G Features and Benefits:

Rated at 140 gallons per hour, high pressures of 70PSI and backed by FASS limited lifetime warranty the Titanium Signature Series fuel System is capable of supporting your Ford Powerstroke 6.7L diesel engine with enough fuel for aggressive tuning and fuel System upgrades up to 700 HP.
FASS Whisper Technology (FWT) was engineered to meet the stringent demands of today's quiet diesel engines. FASS Whisper Technology was in development and testing for over two and a half years to meet FASS Fuel System's high quality and durability standards. FASS Whisper Technology effectively and drastically reduces the sound levels of the Signature Series FASS Diesel Fuel System to a "whisper" while at the same time increasing fuel flow rates. FASS competition reduces noise levels by reducing flow rates.
Performance Radius Cuts (PRC) are an advanced machining technique used to improve the flow of fuel through the FASS System by creating smooth-flowing cuts within the aluminum housing. This prevents the reintroduction of air and vapor back into the fuel and prevents eddy currents from forming within the corner of a 90-degree sharp angle. FASS Titanium Signature Fuel Systems are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts, lesser competitors commonly use T-Bone and square 90-degree fittings that can limit fuel flow, cause restrictions and reintroduce air back into your fuel.
Mass Flow Return (MFR) technology is used to continually polish your fuel by keeping a positive pressure on the fuel being delivered to the engine to prevent cavitation along with galling and scoring. Then returning the fuel, that is not yet needed, back to the tank after it has been passed through the filtration process, removing dirt, air, vapor and water. This means your fuel is being constantly "Polished" (cleaned), guaranteeing that your diesel truck always has the cleanest fuel possible. The MFR in combination with the optional FASS Fuel Heater options will help insure "EXTREME" cold weather operations!
Complete Replacement System
Removes Water, Air and Debris From Diesel Fuel
2 Micron Filtration Rating
Protects and Extends The Life Of Your Injectors
Improved Cold Weather Starts
Decreases Carbon Monoxide and Carbon Dioxide Emissions
½ Inch Fuel Lines and Ports
Fuel Mileage Improvement
Improved Fuel Volume Delivery
Smoother Engine Idle
Optional Electric Heater Ports
Optional Fuel Pressure Gauge Port
Limited Lifetime Warranty
1,000,000 Mile Motor
30,000 Mile Filter Life Expectancy
Quietest Motor On The Market

FASS Bulkhead and Suction Tube Kit - FASS BHF-1005:

This kit includes a FASS BHF-1005 (Bulkhead and Suction Tube Kit). Machined from 6061 T-6 Billet Aluminum. This Bulkhead fitting is designed to mount directly to the factory fuel tank module (sending unit) to allow the FASS to directly draw and return fuel to the fuel tank module, effectively eliminating all 1/4 tank and 1/8 tank issues when installed correctly. The pickup tube is fabricated out of PTFE Teflon which can be easily cut to adapt to different depth of fuel tanks. Properly installed, you can safely operate down to approximately 0 miles until empty.

FASS Bolt On Bracket Mounts:

Bolt On Bracket Mounts old mounting styles required drilling or welding when mounting your new System. Mounting your Titanium Signature Series System takes only minutes and all brackets are made from machined steel for superior support and strength.

FASS Titanium Signature Series System:

The Titanium Signature Series diesel fuel System was engineered by FASS ( Fuel Air Separation Systems ) Diesel Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration System in the diesel industry.
A Titanium Signature Series fuel System also offers advanced filtration benefits that will help protect your Powerstroke injection Systems, effectively extending the life of both your Injection System and Injectors.
These Benefits include an improved filtration rating of 2 Microns, a built-in water separation filter, and FASS Diesel Fuel Systems patented air/vapor removal process. Aftermarket Systems are important for both drivers and high-performance applications when looking to improve either fuel economy or increase horsepower/torque.

FASS Warranty and Information:

FASS Limited Lifetime Warranty - FASS TSF17180F140G
- Learn more by visiting the FASS Diesel Fuel Systems manufacturer website at fassride.com:
- FASS Warranty Registration and Policies: https://fassride.com/customer-support/warranty-registration-policies/
- Installation Manual - FASS Titanium Signature Series: https://fassride.com/customer-support/fass-installation-manuals/titanium-signature-series-installation-manuals/

CALIFORNIA WARNING: Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

FASS NDTSF17180F140G - No-Drop Series - 140 GPH Fuel System and Sump Kit

FASS Fuel System 140 GPH and Fuel Sump Kit / 2011 - 2016 Powerstroke 6.7 L - No-Drop Series - NDTSF17180F140G

~~$883.16~~ $839.00 Sale

Add To Cart

FASS SK5501 Diesel Fuel Sump Kit

~~$177.89~~ $169.00 Sale

Add To Cart

FASS Fuel System 140 GPH / 2011 - 2016 Powerstroke 6.7 L - Titanium Signature Series - TSF17180F140G

60-65 PSI / 140 GPH / Stock to 700 HP

Related Items